Product Specifications of Luxury Tickeing Oblique Octagon Wing Gate Turnstile <TDH-Y303> |
| Picture of the product | Document Number: | |
| Version | A/0 |
| Revision Time | |
| Revised by | |
| |
| Product Parameters | Dimensions | 1200*300*980mm | Housing Material: | Housing:stainless steel 304 1.5MM
Top:stainless steel 304 2.0MM |
| Wing Arm material: | 15MM Acrylic wing board | channel width | 550MM or 600MM |
| application: | Suitable for indoor/outdoor pedestrian passages; such as: scenic spots, parks, playgrounds/primary and secondary schools/colleges/office buildings/hotels/residential quarters/factory parks/hospitals/enterprises and institutions/government halls/sports venues, etc.; |
| Product Drawing: |
| Technical Parameter | ◆Housing Material:AISI SUS304
◆Internal structure: frame structure/standard stainless steel shell; frosted black paint on both ends;
◆Power Voltage: AC220V±10V
◆Drive motor: DC brushless motor(24~36VDC)
◆Movement structure: full-height direct-drive movement, fixed with upper and lower screws, firmly bearing force; high-precision movement and motor direct drive, higher precision, faster opening and closing speed, longer service life (patented product); double-flying wing aircraft The operation mode of the core (optional) adopts a four-bar linkage structure, which has high stability and low noise.；
◆Service life: 5,000,000 times
◆Infrared sensor: 8 pairs (can support more than 8 pairs of configuration)
◆Working temperature:-35℃～75℃
◆Relative humidity:0～90%(non-condensing)
◆Communication interface: RS232 serial port
◆Communication protocol: MODBUS protocol
◆Turnstile working speed: 45~50 people/min; double-flying wing configuration ≤ 30 people/min (memory mode can be turned on)
◆Passing time: swiping card travel time: 10S (if no one passes within 10S: the gate will automatically close, and the time can be adjusted according to needs) |
| Function parameter | Basic Function | ●Alarm function: with sound and light alarm function |
| ●Anti-interference:It can limit the abnormality of the tutrnstile caused electromagnetic and other external factors |
| ●Pass mode setting: One-way pass, two-way pass, free pass (wing arm retraction), etc. can be set through the buttons on the main control panel |
| ●Anti tailing: prevent the unauthorized situation of too many people at one time. |
| ●Anti pinch function:When the tutrnstile is in the process of closing, the tutrnstile will stop closing after detecting the anti-pinch signal |
| ●Automatic reset: after opening the gate, if the user does not pass within the specified time, the system will automatically cancel the user's permission to pass this time; The default is 10 seconds, and the traffic time can be set through the switch |
| ●Access control: External port can connect a variety of biometric devices |
| ●Power off and opening:switch off after power off, and the switch opening direction can be set |
| ●Fault detection:Control board can support fault type detection,Assist in analyzing the causes of faults and handling faults and abnormalities. |
| ●Passing indication: with passing status indicator; It can also set the alarm function of exceeding the stay time in the channel |
| |
| Extension Function | ▲ Passing Mode
△ Normal: normal pedestrian passing mode
△ Passing: automatic vehicle / electric vehicle / motorcycle passing mode |
| ▲Voice broadcast, expandable voice module, and volume adjustment |
| ▲Opening / closing delay, set the delay opening time after the gate turnstile receives the opening signal/set the delay closing time after pedestrians pass, the default is 0 seconds |
▲Card swiping in the channel
△Default forbidden: card swiping in the channel (inductive infrared area) is invalid
△Permission:card swiping verification is allowed in the channel |
▲Whether the trailing and reversing are blocked by closing the door
△The gate Closed: the reverse/trailing (A swipe card, B pass) will not close the gate
△Close the gate first and then open the gate: close the gate first for reverse/trailing traffic, and then open the gate again after closing
△Do not open the gate after closing the gate: the reverse/trailing traffic will close the gate, and the gate will not be opened again after closing |
▲Fire linkage
△Normally open mode: the gate remains open;
△Normally closed mode: the gate remains closed |
▲Passage Mode
△Bidirectional passage,swiping card bi-directionally for people flow.
△Bidirectional free passage, no credit card verification is required.
△Single directional passage, Single directional (A) swiping card, and the gate opens normally for people flow; reverse directional (B) swiping card is invalid, and the gate closes.
△Single directional free passage, Single directional (A) free passage, and reverse directional passing (B) require a swiping card verification.
△Passing is prohibited, Bidirectional swiping card is invaild, and the gate enters the locked state. |
